High quality single-component flexible adhesive


FixSeal - Fix15 is a high quality single-component flexible adhesive joint sealant, suitable for above and below waterline applications. Based on a Modified Polymer®, chemically neutral and fully elastic. Suitable for use in structural low movement joints in Marine, also suitable for automotive, aerospace and construction applications where a tough flexible adhesive sealant is required.

FixSeal - Fix15 is recommended for fixing and sealing of porous and non porous substrates including all metal types, most plastics, glass, carbon fibre, fibreglass, timber and many other components and parts found within marine vessels, also suitable for automotive, caravan, building construction industries.

FixSeal - Fix15 has excellent non-sagging properties and short cut-off string so that it can be applied in thick layers, with non-bubble formation within the sealant.
FixSeal - Fix15 shows excellent resistance to UV rays climate changes and environmental agents, non-yellowing white and colourfast black, independently tested and rated for +15 yrs UV exposure, and is resistant to many chemicals, fresh and salt water.

FixSeal - Fix15 is overpaintable with water based paints and many other systems, and will not stain porous materials such as natural stone, granite and marble we do recommend sample testing to confirm compatibility.


Surface must be clean and dry, free from dust and oil.  For best results clean all non-porous substrates such as gel coats, aluminium, steel, stainless steel, plastics with a good alcohol cleaner such as AC50.
For best results prime porous substrates such as timber with Primer PR10.
FixSeal - Fix15 can also be used as external window glazing finishing wipes for a smooth great looking finish.

Do not apply Acetone to raw fibreglass as a pre cleaner, as it may reactivate the resins making the fibreglass a sticky and non-adhesive surface.


Cartridge: cut off the tip only on the plastic nozzle not below the thread at the nozzle location, screw fix the plastic nozzle and cut according to the extrusion diameter required, extrude from cartridge with a manual FG3/FG4 or FG5 pneumatic gun.
Sausage: Insert sausage into a manual barrel tool FG7 or pneumatic barrel tool FG8, cut the sausage just behind the clip, screw the front end flange with the nozzle cut to diameter of bead required onto the barrel tool and dispense carefully.

Cleaning: Methylated Spirits immediately after application and before curing
Tooling: Soapy diluted solution before skin formation
Repair: Repair with FixSeal - Fix15.

Technical Data 

 Technical Data Sheet - FixSeal/Fix15

Material Safety Data - FixSeal/Fix15


Phone 1300 887 077

Address 1/20 Export Drive,
Molendinar QLD 4214 See All Locations